Hikvision DS-3E1506P-EI 4 Port Gigabit Smart POE Switch | DS-3E1506P-EI

Hikvision DS-3E1506P-EI 4 Port Gigabit Smart POE Switch | DS-3E1506P-EI

L2, Smart Managed, 4 Gigabit RJ45 PoE ports, 2 Gigabit RJ45 port, 802.3af/at, PoE power budget 60W, Max. 300 meter PoE transmission, Supports Hik-Central/iVMS 4200/Hik-Partner Pro Unified Topology Management, cloud management, Rack mount

• Brand : Hikvision
• Model : DS-3E1506P-EI
• Color : Grey
• 4 × Gigabit PoE port,2 × Gigabit RJ45 port
• Total PoE Power Budget 60W
• Support 802.1Q VLAN
• Support PoE watchdog to detect and restart the cameras that do not respond
• Support STP/RSTP Loop prevention
• Support cable detection to locate failureUp to 300 m Long Range PoE Transmission
• 6KV Surge Protection

General

• ShellMetal material
• Net Weight0.27 kg (0.6 lb)
• Gross Weight0.77 kg (1.7 lb)
• Dimensions (W × H × D)121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”)
• Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
• Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity5% to 95% (no condensation)
• Relative Humidity5% to 95% (no condensation)
• Power Supply54VDC, 1.2A
• Installation ModeDesk-Mounted,Wall-Mounted
• Max. Power Consumption65 W
• Power Consumption In Idle1.6 W
• Surge Protection6 KV

Network Parameters

• Ports4 × Gigabit PoE port,2 × Gigabit RJ45 port
• MAC Address Table2 K
• Switching Capacity14 Gbps
• Packet Forwarding Rate10.42 Mpps
• Internal Cache1 Mbits

PoE Power Supply

• PoE StandardIEEE 802.3af,IEEE 802.3at
• PoE Power PinEnd-span: 1/2(-), 3/6(+)
• PoE PortPoE: Ports 1 to 4
• Max. Port Power30 W
• PoE Power Budget60 W

Software Function

Long Range

• Ports 1 to 4: up to 300 m.
• Long range performance may vary depend on camera model or cable condition.

• Port Isolation

  Ports 1 to 4: port isolation mode to improve network security

  Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

• PoE WatchdogPorts : 1 to 4: auto detect and restart the cameras that do not respond.

Link Aggregation

• Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
• Support static link aggregation.
• Support 2 aggregation groups.

Loop Prevention

• Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
• Support 802.1D STP.
• Suppport 802.1w RSTP.

VLAN

• VLAN is used for network scale planning and network health improvement.
• Support 802.1Q.
• Configurable VLAN ID from 1-4094.
• Support Trunk, Access port mode.
• Support Max. 32 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

• 1. Display the port rate.
• 2. Display the port bandwidth utilization rate.
• 3. Display the PoE power usage.
• 4. Display topology information.
• 5. Display the alarm status.
• 6. Restart ports and devices.
• 7. Enable port long-rage mode.
• 8. Remotely upgrade the device.

System Maintenance

• Support device management via web.
• Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
• Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
• Support management via Hik-Central Pro.
• Support remote management via Hik-Partner Pro.
• Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
• Supports 802.1ab LLDP for peer device discovery.
• Support port mirroring for fault locating.